Light, Filter and Sensor Unit

Cabinet Top Module

The Cabinet Top Module is the working half of GrowlyBox. Its matte-black PETG shell carries exhaust vent slots across the top face, and its inner ceiling plate holds the 75W full-spectrum Samsung LED panel, the ESP32-CAM camera looking down on the plant, the two-stage activated carbon filter, the temperature and humidity sensor and two 80 mm silent fans. Wiring is completed at the factory, so the module drops straight onto the middle and base sections. Sold on its own to renew the top module of an existing cabinet or to build your own configuration.

6.999 TL

  • 75W full-spectrum Samsung LED panel mounted to the ceiling
  • ESP32-CAM camera — watch your plant from above
  • Two-stage activated carbon filter built in
  • Temperature and humidity sensor wired at the factory
  • 2× 80 mm silent fans for exhaust
  • Matte-black PETG shell with vent slots across the top face
  • Drops onto the middle and base modules with no extra parts

FAQ

Does this module work on its own?

No. The top module is the working unit; it is used together with the base module that holds the plant and the middle module that adds height. A 220V mains cord and a 12V adapter are also required for power.

Will it fit my existing GrowlyBox?

Yes. Every GrowlyBox module is built to the same 35 cm diameter fit, so the top module seats onto your existing base and middle sections without modification.

Do I have to wire it myself?

No. The LED panel, camera, filter, sensor and fans arrive mounted and wired from the factory. All you do is seat the module and connect power.