The GrowlyBox smart grow cabinet — fully equipped, modular and repairable design. Price and specs.
GrowlyBox — Smart Grow Cabinet · 9.999 TL 35 × 35 × 90 cm — PETG printed body, isolated door, swappable LED panel, carbon filter and silent fans.
Cabinet Top Module — Light, Filter and Sensor Unit · 6.999 TL The module that carries the cabinet hardware: a 75W full-spectrum LED panel, the ESP32-CAM camera, an activated carbon filter, the climate sensor and two 80 mm silent fans, all mounted to the ceiling plate.
Cabinet Extension Module — Height Extension Ring · 2.000 TL The hollow extension ring that adds a fixed extra height to the cabinet, used as a single layer. Sits between the base module and the top module, seating to the same 35 cm diameter by fit.
Cabinet Base Module — Growing Chamber · 2.000 TL The base module the plant and its pot sit in. The perforated intake low on the wall lets the fans above draw fresh air through the cabinet.
75W Full-Spectrum LED Module — Pre-Wired LED Panel · 2.500 TL A 75W full-spectrum Samsung LED panel with its driver and mains cable already wired, supplied as a standalone module. Unbox it and plug it in.
Activated Carbon Filter — Two-Stage Odour Filter · 1.000 TL The replacement cartridge that passes the cabinet exhaust through two stages of activated carbon. Its ribbed face and deep cassette body seat into the top module by fit.
80 mm Silent Fan — 12V DC · 3000 rpm · 500 TL An 80 × 80 × 25 mm, 12V DC, 0.15 A, 3000 rpm two-wire ventilation fan. The spare that drives cabinet exhaust and LED cooling.
DHT21 Temperature and Humidity Sensor — Pre-Wired Climate Sensor · 500 TL The DHT21 sensor that reads cabinet temperature and relative humidity, supplied with its three-wire lead attached. The vented housing is open to airflow.
Soil Moisture Sensor Module — Two-Prong Probe + Board · 500 TL A two-prong stainless probe that reads moisture beside the root, with a comparator board whose threshold is adjustable. So a watering is never missed.
12V Power Adapter — Fan and Sensor Supply · 500 TL The wall adapter that powers the 12V side of the cabinet: the fans, the sensors and the control unit. Supplied with a barrel-jack output lead.
220V Mains Power Cord — LED Panel Mains Cord · 550 TL The cord that connects the LED panel to 220V mains. A European plug on one end, a figure-8 (C7) connector on the other.